What a lovely convention! I was honestly surprised how nice it was. I mean, I didn't really do anything except for work in the Dealer's Den and then go to Closing Ceremonies. Oops! But despite that, I had a wonderful time. This con was a breath of fresh air for me after only having gone to FWA for the past few years. FWA is so huge and seems to be mainly a "party con", whereas Fangcon reminded me of the first Megaplex I went to years ago: small and everyone was willing to talk to everyone. It really felt like being among a bunch of friends. I don't know if that is just a side effect of being a smaller con, or if it had to do with the different kind of people who attended this one. The crowd was a lot older than the crowd at FWA usually is; I think I only saw maybe three underage badges the entire con! Everyone was also so incredibly polite! Most people I meet at furcons are polite, but the people at this con were some of the most polite I had met at any con.
Now, unfortunately I didn't take a single picture at the convention. Boo.... But I did get to go to the Birmingham Zoo the day after the convention and took a ton of pictures there! A big thanks to the zoo and to Fangcon for the free tickets!
Some of my Favorite Badges from the Con
I have to thank everyone who commissioned me both at the con and for take-home work! You all are amazing people and so creative with your concepts and character designs. I'm going to be busy for awhile thanks to you all! Everyone who got a take-home commission has been contacted, so if you still haven't heard from me, email me ASAP!
Like I said, I am going to be busy for awhile with the take-home commissions! I also have an art show coming up that I need to do some paintings for! I've never done an actual art show before, nor have I sold my paintings, so I am super excited-nervous! It's going to be a busy next month for me! If you're in the Rome, GA area on November 11, come check out my art (and maybe buy something) at the Artist Expo!
Here is the process of designing this year's Halloween card! I'm also making my full-sized .psd files available for everyone! This one is a bit different from normal though, because I am using a template from moo.com where I got this year's cards printed (I recommend their business cards, high quality!). Normally, I work on much larger canvases, but this template is only 1263x1795px at 300 ppi.
Getting Ready to Draw
First, I created a nice work area for me by creating a folder for all of my art layers below the Artwork Guidelines folder. I decided I wanted to keep it all tidy that way! I also changed the template's "Your Design Here" layer to simply "White BG" and locked it. I normally create a background layer of white and draw anything else on a transparent layer above it, that way I can have a nice clean look, but I can also change the background if I want to later. Make sure you lock the background layer so you don't accidentally draw on it! I also hid the Artwork Guidelines layer as I didn't need them, collapsed the Artwork Guidelines folder, and locked it. I decided to leave the actually guides visible right now, though you don't have to if you don't want. If you don't have a lot of memory, you can merge or even delete these to help save space, but remember that you do need to have the proper bleed area in your design!
TIP: You can use any color as your background layer, or even a texture if you want something unique! If staring at a white screen hurts your eyes, try changing the background to a tan or light grey so there isn't such a contrast!
Doing the Art
This is pretty straightforward. Sketch your design, Ink, and Color! I started with a traditional sketch in my sketchbook, just because I got the urge to draw when I wasn't around my computer. Because my scanner isn't yet set up, I ended up just taking a photo of my sketch and uploading that to my computer. I then opened it up in Photoshop and copy/pasted it into my template, making sure it was in the Art folder.
To ink, simply lower the opacity of your sketch, create a new layer, then draw over your sketch with nice clean lines. For this design, I decided to try out some new brushes I've picked up over the last few months. I wanted a more grungy appearance than my usual super clean lines. During the inking stage, I also make any edits that I feel the design needs to make it look even better. Most of this was fixing the incredibly uneven right side! If you want to see the inks by themselves, I used them for my first Inktober drawing!
The next step is to do your flat colors. I like to create a new folder for the color, just to keep things organized. Color layers are normally the bulk of my layers, so putting them in their own folder allows me to close the folder to easier work on the finishing touches later. The exact number of layers you'll need will vary between pieces, depending on how many different colors you need and how much detail there is. For my Halloween card, I ended up with four layers for the flat colors, plus one for the card's background.
TIP: Plan ahead! You can use layers now to help make shading easier later. Even if two neighboring areas of your piece are going to be the same color, you still might want to put the flats on their own layers if the shadows are going to be vastly different. This allows you to not be as careful when shading!
It was at this stage that I also added in the text for my card, but it was mainly for planning purposes before I got too far along in my design. I wasn't even sure I was going to have text at this point, but I think it worked out!
For shading, I made liberal use of Clipping Masks. This is why I was very particular with the layers for my flat colors. In retrospect, I should have made a separate layer for the lower jaw flats as I was having issues keeping the shading separate from the upper part of the skull! If you don't have a lot of memory, this is a stage that may cause you issues. Instead of being able to have a bunch of layers with their clipping mask layers, you may have to work on one shading layer at a time and merge with the flats when finished with that layer. As I mentioned earlier, having many layers can make Photoshop take up a lot more of your computer's memory than it should.
Preparing for Printing
If you used the template from moo.com, you should have the correct settings for their needs. If not, or if you are using a different printing company, be sure to check their website for the settings you need. You should always check to see what a company needs first because things like color mode, resolution, and image size can all cause problems in the end if you didn't use the correct ones while drawing. For example, some companies require RGB and some require CMYK, and it is impossible to change these settings in the end without losing some of your original color quality!
If you have text, be sure to pay special attention to how they want the settings for those! Due to how my textures went over my text, I simply flattened my image and submitted it as if it were a photograph.
The Final Product!
This is the final product that I sent out this year to anyone who signed up! I couldn't be happier with how they turned out. The printed version looks exactly like my original drawing (even if my own photo washed out the colors a bit). I love doing these every year as a thank you for supporting my art throughout the year, so if you missed this year's, be sure to keep an eye out next year to get one for free.
I also have this year's edition available for sale for $5 each at my online shop. They're a numbered limited edition of 50 so don't miss out! They're professionally printed on high quality paper stock and come with brown kraft paper envelopes so you can mail them to anyone you would like! Inside is a fun Halloween poem about witches and good luck.
An early round-up this week! I'll have a real blog post tomorrow, so be sure to follow me so you don't miss it!
Here and here are links to the last two round-ups!
I tried something new at the start of this week: greyscale shading! I figured this would be similar to working in inks, but honestly I just wanted to give them a bit more depth! Later in the week was prep for Fangcon, so I had some doodles and commission work insead! I'll include the rest of this week in next week's round up because I'll be busy at Fangcon and won't be able to post!
If you missed last week's round-up, you can check that out here.
It's been a strange inktober. I've been using it as an excuse to work more on a bunch of unfinished sketches that I hope to turn into merchandise. I felt inspired to do this little "cheat" after I used many of last year's inktober pieces for merchandise in my Redbubble shop. Look for some of these in the coming months!
It's a short week this week just because of the way the days fell. Oh well! Here are five different inked pieces I did each day this week! I have really been pushing my style in different directions, what do you think? What is your favorite so far?